![]() |
||
Blue LaserUltra-compact High reliability High stability Low noise
Blue Laser Wavelengths and ApplicationsBlue lasers cover roughly 440 to 490 nm, and violet lasers 375 to 430 nm. Diode lasers cover 375 to 465 nm with fast modulation. The 473 nm laser is a diode-pumped solid-state (DPSS) laser, made by frequency-doubling Nd:YAG. 488 nm is available in low-noise and single-frequency versions.
For selection by output type, see the DPSS laser selection guide. For fiber output, see fiber-coupled lasers. Violet Blue Lasers 375/390-425/405/430/445/456/465/473/488 nmSPECIFICATIONS(download) Wavelength (+/-5 nm) 375nm 405 390-435 440-456-465 473 488 nm Max. output power(mW) 250 2000 2000 3000 1000 2000 TEMoo laser Max. output 60 400 100 450 260 260 mW Low power available 1W-3W*, 500, 200, 150, 100, 75, 50, 25, 10, 5 mW Polarization ratio 100:1 Transverse mode TEMoo, M2<1.3 Beam diameter (1/e2) and 1.1 mm Beam divergence 0.6 mrad Output stability <1% over 24 hrs; ultra-stable option <0.25% over 24hrs Beam point stability 0.005 mrad/degree C Longitudinal mode Multiple longitudinal mode Single longitudinal mode with >50 m coherence length Noise (rms, 10Hz-20MHz) <0.25 % Operation temperature 10 to 40 degree C Dimensions of laser head 3x3.6x13.5 cm; Dimensions type 4 Dimensions of power supply AC: 5x14x15 cm, DC: integrated inside laser head Warm-up time 30 seconds Operation voltage 12-15 VDC or 90-250 VAC Typical power consumption 6 Watts* contact CrystaLaser for detail Diode-pumped Ultra-compact 473 nm Blue LaserSPECIFICATIONS(download) Wavelength 473 nm Laser material Nd:YAG CW output power(mW) 200, 150, 100, 75, 50, 25, 10, 5; Noise <2%(1Hz-10kHz) Transverse beam mode TEMoo, M2<1.2 Beam divergence 3 mrad Beam diameter (1/e2) 0.25 mm Beam point stability 0.005 mrad/degree C Stability (rms) < 2% over 8 hours (Ultra-stable option: <0.25%, over 24 hrs) Longitudinal mode 2-4 longitudinal modes Linewidth 0.1 nm Noise <2%(1Hz-10kHz); L-version 80mW Noise <1%(1Hz-50MHz) Polarization ratio > 50 : 1 Operation temperature 10 to 35 degree C Operation voltage 90-250 VAC or 9-20 VDC Power consumption 15 W Warm-up time 1 minute Dimension of laser head 3x3x12 cm w/6 mm thick base plate; Dimensions type 1 Dimension of power supply AC: 5x14x15 cm3 (2x5x6 inch) DC: 3.5x8.5x12.7 cm3 Expected life time > 10,000 hours
* For more information, please access the online Information Request Form and download catalog.
|
|
© Copyright CrystaLaser 2017 All Rights Reserved |